1、 Product performance:

ZQ-1260 modified silane sealant is a product produced using high-quality raw materials and special processing techniques. It is a single component, medium to high modulus, hygroscopic cured into an elastomer, with the advantages of fast deep curing speed, good aging resistance, and high strength. It has high bonding strength, good aging resistance, solvent-free, friendly to the human body, and is healthy and environmentally friendly. It has the following outstanding advantages:

● Low odor

● No primer can achieve adhesion to multiple substrates

● Excellent UV resistance and anti-aging performance

● Not moldy

● Paintable

2、 Main purpose:

Widely used for self adhesion and mutual adhesion between metals, plastics, glass and other materials, as well as sealing of gaps and joints. Mainly suitable for the bonding and sealing of car windshields; Bonding and sealing of components such as buses, trains, heavy truck cabins, ships, containers, elevators, ventilation pipelines, and protection of bridge steel cables.

3、 Technical parameters:

Note: All mechanical and electrical properties were measured after 7 days of curing at 25 ℃ and 55% relative humidity. The performance of each type of silicone is subject to the actual testing report.

4、 Usage process and precautions: 

1. Clean the surface: Clean the surface of the adhesive or coated material to remove rust, dust, oil and other pollutants.

2. Glue application: Unscrew (or cut) the cap of the rubber hose, squeeze the glue onto the cleaned surface, distribute it evenly, and fix the adhered surface together.

3. Curing: Place the components that have been glued or sealed in air for natural curing. The curing process is a process of curing from the surface to the inside. Within 24 hours (at room temperature and 55% relative humidity), the adhesive will cure to a depth of 2-4mm. If the application position is deep, especially in areas that are not easily in contact with air, the complete curing time will be extended. If the temperature is low, the curing time will also be extended. It takes more than 7 days for a 6mm thick sealant to fully cure.

4. After the operation is completed, the unused adhesive should be immediately tightened and sealed for storage. When reusing, if there is a slight crust at the sealing area, it can be removed without affecting normal use. During the storage process of the adhesive, there may also be a small amount of solidification at the nozzle, which can be removed for normal use without affecting product performance. If it accidentally enters the eyes before solidification, seek medical attention.

5、 Storage period: 

This product is stored in a cool and dry place at 28 ℃, with a shelf life of 12 months.

6、 Executive standards:

Q/320481 MTH 002-2016

7、 Transportation:

This product is non hazardous and is transported under general conditions.               

8、 Packaging specifications:

310ML/piece, 25 pieces/box.

9、 Limited Liability Statement:

This product description cannot replace the necessary testing conducted by the user before use, and the user's test results are the only guarantee that this product is suitable for its specific application requirements. Our company only guarantees that the product meets the factory quality inspection requirements and does not accept any other form of warranty or claim clauses. Confirmed as a quality issue with this product, our company is limited to providing replacement or refund of sales amount for the problematic product and is not responsible for any indirect or incidental damages.