Home/Products/Industrial glue/Adhesive used in the electronic and electrical industry
Product Center
Product Center
ZQ-808 thermal conductive silicone grease product uses high-quality basic raw materials, and is a paste like substance composed of metal oxides with good thermal conductivity and insulation properties and organic siloxanes. This product is non-toxic, non corrosive, odorless, non drying, and insoluble. It has excellent thermal conductivity, good electrical insulation, wide operating temperature (working temperature -60 ℃~+200 ℃), good stability, low consistency, and good construction performance.
ZQ-808 thermal conductive silicone grease product uses high-quality basic raw materials, and is a paste like substance composed of metal oxides with good thermal conductivity and insulation properties and organic siloxanes. This product is non-toxic, non corrosive, odorless, non drying, and insoluble. It has excellent thermal conductivity, good electrical insulation, wide operating temperature (working temperature -60 ℃~+200 ℃), good stability, low consistency, and good construction performance.
Widely used for heat dissipation, filling or coating of electronics, electrical appliances, and components to export the heat generated by the components. For example, filling gaps between CPUs and heat sinks, high-power transistors, thyristor components, gaps between diodes and substrates (aluminum, copper), filling gaps between TV amplifier tubes and heat sinks, semiconductor refrigeration, etc., can reduce the working temperature of heating components.
Performance index | ZQ-808 | |||||
ZQ-808A | ZQ-808B | ZQ-808C | ZQ-808D | ZQ-808E | ZQ-808F | |
Appearance | White paste | White paste | Grey white paste | Grey paste | Dark gray paste | Dark gray paste |
Proportion（g/cm3） | 2.5 | 2.6 | 2.65 | 2.8 | 3.0 | 3.2 |
Penetration（1/10mm，25℃） | 320 | 330 | 360 | 380 | 420 | 420 |
Oil separation degree（%。200℃，8h） | ≤2.0 | ≤2.0 | ≤2.0 | ≤2.0 | ≤2.0 | ≤2.0 |
Volatile matter（%。200℃，8h） | ≤2.0 | ≤2.0 | ≤2.0 | ≤2.0 | ≤2.0 | ≤2.0 |
Operating temperature℃ | -60～200 | -60～200 | 60～200 | -60～200 | 60～200 | -60～200 |
Thermal conductivity（W/M·K） | 0.4--0.6 | 0.8-1.0 | 1.2-1.5 | 2.0 | 3.0 | 4.0 |
Volume resistivity（Ω·cm） | 1.0×1015 | 1.0×1015 | 1.0×1015 | 1.0×1015 | 1.0×1015 | 1.0×1015 |
Breakdown voltage intensity（kv/mm） | ≥10 | ≥10 | ≥10 | ≥10 | ≥10 | ≥10 |
Note: All mechanical and electrical properties were tested after 7 days of curing at 25 ℃ and 55% relative humidity. The performance of each type of silicone is subject to the actual testing report.
1. Clean the surface to be coated, remove oil stains, and then directly extrude the thermal conductive silicone ester. Apply evenly to the surface to be coated. The coating method can be brush coating, scratch coating, or roller coating as needed.
2. The construction surface should be uniform and consistent. When applying, it is not better to apply more, but to apply a thin layer while ensuring that the surface gap is filled.
This product is stored in a cool and dry place at 25 ℃, with a shelf life of 12 months.
Q/320481 MTH 002-2016
This product is non hazardous and is transported under general conditions.
1.0kg/can, 50ML, 100ML aluminum tube/piece, can also be agreed upon according to user needs.
This product description cannot replace the necessary testing conducted by the user before use, and the user's testing results are to ensure that this product is suitable for its specific application requirements. Our company only guarantees that the product meets the factory quality inspection requirements and does not accept any other form of warranty or claim clauses. Confirmed as a quality issue with this product, our company is limited to providing replacement or refund of sales amount for the problematic product and is not responsible for any indirect or incidental damages.
If you are interested in our products, welcome to leave us a message, we will provide you with satisfactory products and services! !
