Product Category
ZQ-898 Single component silicone rubber
ZQ-898 Single component silicone rubber

ZQ-898 Single component silicone rubber

ZQ-898 is a universal single component silicone sealant that solidifies into an elastomer at room temperature. It belongs to the deaoxime type of curing and is non corrosive to the vast majority of materials. It has good resistance to cold and hot alternation, aging resistance, and electrical insulation performance. Outstanding moisture resistance, seismic resistance, corona resistance, and anti leakage performance. Good resistance to high and low temperatures, with little change in performance

Main Configuration

1、 Product performance:

ZQ-898 is a universal single component silicone sealant that solidifies into an elastomer at room temperature. It belongs to the deaoxime type of curing and is non corrosive to the vast majority of materials. It has good resistance to cold and hot alternation, aging resistance, and electrical insulation performance. Outstanding moisture resistance, seismic resistance, corona resistance, and anti leakage performance. Good resistance to high and low temperatures, with little change in performance within the range of -50 ℃ to 200 ℃, and good adhesion to most metals and plastics.

2、 Main purpose:

This product can be used for bonding various electronic and electrical materials and fixing components. And bonding and sealing for general industrial purposes. It can be used for bonding and sealing some lamps, LEDs, and car lights, playing a good bonding and waterproof role.

3、 Technical parameters:

Performance index

ZQ-898

Before

curing

Appearance

White/Black/Grey Paste

Relative density(g/cm3)

1.25-1.45

Surface drying time m

5--30

Complete curing time(d)

3--7

Curing type

Single component deaoxime type

After

curing

Hardness A

25-50

Tensile strength(Mpa)

1.2-2.0

Shear strengthN/cm

1.2-2。0

Elongation

200-500

Peel Strength(N/mm)

>5

Operating temperature range

-60℃~+200℃

Volume resistivityΩ/cm

≥1.5×1015

Dielectric strength(Kv/mm)

≥18

Dielectric constant(1.2MHz)

2.8

Note: All mechanical and electrical properties were measured after 7 days of curing at 25 ℃ and 55% relative humidity. The performance of each type of silicone is subject to the actual testing report.

4、 Usage process and precautions: 

1. Clean the surface: Clean the surface of the adhesive or coated material and remove pollutants such as rust, dust, and oil.

2. Glue application: Cut open the cap of the glue tube, squeeze the glue onto the cleaned surface, distribute it evenly, and fix the adhered surface together

3. Curing: Place the components that have been glued or sealed in air for natural curing.

The curing process is a process of curing from the surface to the inside. Within 24 hours (at room temperature and 55% relative humidity), the adhesive will cure to a depth of 2-4mm. If the location is deep, especially in areas that are not easily in contact with air, the complete curing time will be extended. If the temperature is low, the curing time will also be extended. Before further processing or packaging the bonded components, it is recommended that users wait long enough to ensure that the firmness and integrity of the bonding are not affected.

5、 Storage period: 

This product is stored in a cool and dry place at 28 ℃, with a shelf life of 12 months.

6、 Executive standards:

Q/320481 MTH 002-2016

7、 Transportation:

This product is non hazardous and is transported under general conditions.

8、 Packaging specifications:

300ML PE plastic pipe/piece, 25 pieces/box.

9、 Limited Liability Statement:

This product description cannot replace the necessary testing conducted by the user before use, and the user's testing results are to ensure that this product is suitable for its specific application requirements. Our company only guarantees that the product meets the factory quality inspection requirements and does not accept any other form of warranty or claim clauses. Confirmed as a quality issue with this product, our company is limited to providing replacement or refund of sales amount for the problematic product and is not responsible for any indirect or incidental damages.

Hot key words:

Silicone Sealant Thermal conductive silicone grease LED light sealant Window sealant Electronic potting adhesive Stone adhesive Flame retardant adhesive Anti-corrosion coating Power coating Windshield adhesive Transparent sealant

If you are interested in our products, welcome to leave us a message, we will provide you with satisfactory products and services! !