1、 Product performance:

ZQ-618 anti mold silicone sealant is a single component, neutral room temperature cured high-performance silicone sealant designed specifically to inhibit mold growth in high temperature and humidity environments. It has good water resistance and flexibility, as well as high and low temperature resistance and weather resistance.

2、 Performance characteristics:

1. Excellent anti mold performance.

2. Good adhesion, with good adhesion to most building materials.

3. Neutral curing, suitable for most building materials without adverse reactions or corrosive effects.

4. Excellent weather resistance and aging performance.

5. The elastic body formed after solidification can adapt to a displacement capacity of ± 25% of the load-bearing interface.

6. No sagging phenomenon, can be used for vertical interface construction.

3、 Main purpose:

1. Kitchen countertops, sinks, walls, and veneers.

2. Shower room, washbasin, sanitary ware, and floor.

3. Bathroom equipment, glass and ceramic hot springs.

4. Seals on refrigerators and freezers (not intended for contact with food layers and not in compliance with FDA standards).

5. Sealing, bonding, and repair of other building materials such as aluminum, stone, and coated glass.

4、 Technical parameters:

Note: The above data is for reference only and is not recommended for specification development.

5、 Construction summary:

1. The surface of the substrate for sealant bonding must be clean, dry, and free from dust, oil, and moisture.

2. Clean and dry the surface of the substrate with a clean, lint-free cotton white cloth and a solvent of toluene or acetone to remove stains, and inject glue within one hour.

3. Ensure that the adhesive is fully applied to the joint without gaps, and modify it before the adhesive solidifies without safely isolating air.

4. Before use, on-site substrate adhesion and compatibility tests as well as user satisfaction tests must be conducted.

5. Restricted use in areas that are constantly damp or soaked for a long time.

6、 Usage restrictions:

1. All materials that can exude grease, plasticizers, or solvents, such as oiled wood, oil bottomed steel plate joints, and certain unvulcanized or partially vulcanized rubber linings and tapes.

2. A tightly ventilated area (silicone adhesive needs to be cured by moisture in the atmosphere).

3. Frosted and damp surfaces.

4. Continuous immersion environment.

5. A damp place underground all year round.

6. The surface that needs to be painted may crack or peel off.

7. Places susceptible to wear or physical damage.

8. Will come into direct contact with the surface of food.

7、 Storage period:

This product is stored in a cool and dry place at 27 ℃, with a shelf life of 12 months.

8、 Executive standards:

Q/320481 MTH 002-2016

9、 Transportation:

This product is non hazardous and is transported under general conditions.                

10、 Engineering technical support:

Please refer to the construction process manual for the best application methods and construction design. The company's laboratory can conduct corresponding tests based on the bonding materials provided by the customer. It is recommended that users conduct self adhesive testing before use.

11、 Responsibility statement:

Due to the conditions and methods of using our company's products beyond our control, the above information shall not be used as a substitute for customer on-site testing to ensure the safety, effectiveness, and complete satisfaction of the specific end use of our company's products. The only remedy available to users for breach of warranty by our company is limited to refunding the purchase price or replacing equivalent products. Our company does not assume any responsibility for incidental or joint losses during construction. We kindly request users to determine the spontaneity of the products themselves.

12、 Color and packaging:

Provide white and transparent. We can also produce special colors according to customer requirements. 300ML plastic tube packaging.